WSG1840X
H3C WSG1840X 8-Port (6*1000BASE-T, 1*5GE-T, and 1*SFP Plus) Wireless Integrated Services Gateway
Hardware Specifications
Dimensions:
- 440 × 165 × 43.6 mm (W × D × H)
Weight:
- 1.8 kg
Wireless Throughput:
- 4 Gbps
Port Configuration:
- LAN: 1 × SFP Plus + 4 × GE + 1 × 5GE
- WAN: 2 × GE
- USB: 1
Power Supplies:
- 100V AC ~ 240V AC: 50/60Hz
Operating and Storage Temperature:
- Operating: 0℃ to 45℃
- Storage: –40℃ to 70℃
Operating and Storage Relative Humidity:
- 5% to 95%
Safety Compliance:
- UL 60950-1
- CAN/CSA C22.2 No 60950-1
- IEC 60950-1
- EN 60950-1/A11
- AS/NZS 60950
- EN 60825-1
- EN 60825-2
- EN 60601-1-2
- FDA 21 CFR Subchapter J
EMC:
- ETSI EN 300 386 V1.3.3:2005
- EN 55024: 1998+ A1: 2001 + A2: 2003
- EN 55022: 2006
- VCCI V-3: 2007
- ICES-003: 2004
- EN 61000-3-2: 2000+A1: 2001+A2: 2005
- EN 61000-3-3: 1995+A1: 2001+A2: 2005
- AS/NZS CISPR 22: 2004
- FCC PART 15: 2005
- GB 9254: 1998
- GB/T 17618: 1998
MTBF:
- ≥ 50,000 hours
Software Specifications
Basic Functions:
- Number of Managed APs by Default: 64 ordinary AP or 128 wall-plate AP
- Maximum Number of Managed APs: 128
- Maximum Users of Authentication: 2048
802.11 MAC:
- 802.11 Protocols: Supported
- Number of SSID of Whole Machine: 128
- SSID Hiding: Supported
- 11G Protection: Supported
- 11n Only: Supported
- Use Number Limit: Supported (SSID based, per RF based)
- Keepalive: Supported
- Idle: Supported
- Multi-country Code Assignment: Supported
- Wireless User Isolation: Supported (VLAN based wireless users 2-layer isolation, SSID based wireless user 2-layer isolation)
- 20MHz/40MHz Auto-switch in 40MHz Mode: Supported
- Local Forwarding: Local forwarding based on SSID+VLAN
CAPWAP:
- Automatic AP Registration: Supported
- AC Discovery (DHCP Option43, DNS): Supported
- IPv6 Tunnel: Supported
- Clock Synchronization: Supported
- Jumbo Frame Forwarding: Supported
- Assign Basic AP Network Parameter through AC: Supported (Static IP, VLAN, connected AC address)
- L2/L3 Connection between AP and AC: Supported
- NAT Traversal between AP and AC: Supported
- Roaming: Intra-AC, Inter-AP L2 and L3 roaming, Inter-AC, Inter-AP L2 and L3 roaming
GW Features:
- NAT: Supported
- PPPoE: Supported
- DDNS: Supported
- SSL VPN: Supported
- IPSEC VPN: Supported
- RIP: Supported
- GRE: Supported
Access Control:
- Open System, Shared-Key: Supported
- WEP-64/128, Dynamic WEP: Supported
- WPA, WPA2, WPA3: Supported
- TKIP: Supported
- CCMP: Supported (11n recommended)
- SSH v1.5/v2.0: Supported
- Portal Authentication: Supported (Remote Authentication, external server)
- Portal Page Redirection: Supported (SSID based, AP Portal page push)
- Portal By-pass Proxy: Supported
- 802.1x Authentication: EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-MD5, EAP-SIM, LEAP, EAP-FAST, EAP offload (TLS, PEAP only)
- Local Authentication: 802.1X, Portal, MAC authentication
- LDAP Authentication: 802.1X and Portal
- EAP-GTC and EAP-TLS Supported by 802.1X Login: Supported
- AP Location-based User Access Control: Supported
- Guest Access Control: Supported
- VIP Channel: Supported
- ARP Attack Detection: Supported (Wireless SAVI)
- SSID Anti-spoofing: SSID + user name binding
- AAA Server Selection Based on SSID and Domain: Supported
- AAA Server Backup: Supported
- Local AAA Server for Wireless User: Supported
- TACACS+: Supported
QoS:
- Priority Mapping: Supported
- L2-L4 Packet Filtering and Traffic Classification: Supported
- Rate Limit: Supported with granularity of 8Kbps
- 802.11e/WMM: Supported
- Access Control Based on User Profile: Supported
- Intelligent Bandwidth Limit (Equal Bandwidth Share Algorithm): Supported
- Intelligent Bandwidth Limit (User Specific): Supported
- Intelligent Bandwidth Guarantee: Supported (Free flow for packets coming from every SSID when traffic is not congested, and guarantee a minimum bandwidth for each SSID when traffic is congested)
- QoS Optimization for SVP Phone: Supported
- CAC (Call Admission Control): Supported (based on user number/bandwidth)
- End-to-end QoS: Supported
- AP Upload Speed Limit: Supported
RF Management:
- Country Code Lock: Supported
- Static Channel and Power Configuration: Supported
- Auto Channel and Power Configuration: Supported
- Auto Transmission Rate Adjustment: Supported
- Coverage Hole Detection and Correction: Supported
- Load Balancing: Supported (based on traffic, user & frequency)
- Intelligent Load Balancing: Supported
- AP Load Balancing Group: Supported (auto-discovery and flexible setting)
Security:
- Static Blacklist: Supported
- Dynamic Blacklist: Supported
- White List: Supported
- Rogue AP Detection: Supported (SSID based, BSSID, device OUI)
- Rogue AP Countermeasure: Supported
- Flooding Attack Detection: Supported
- Spoof Attack Detection: Supported
- Weak IV Attack Detection: Supported
- WIPS/WIDS: Supported (7-layer mobile security)
Layer 2 Protocol:
- ARP (Gratuitous ARP): Supported
- 802.1p: Supported
- 802.1q: Supported (Maximum VLANs: 4094)
- 802.1x: Supported
IP Protocol:
- IPv4 Protocol: Supported
- Native IPv6: Supported
- IPv6 SAVI: Supported
- IPv6 Portal: Supported
Multicast:
- MLD Snooping: Supported
- IGMP Snooping: Supported
- Multicast Group: 256
- Multicast to Unicast (IPv4, IPv6): Supported (Set unicast limit based on operating environment)
Redundancy:
- 1+1 Failover between ACs: Supported
- Intelligent AP Sharing among ACs: Supported
- Remote AP: Supported
Management and Deployment:
- Network Management: WEB, SNMP v1/v2/v3, RMON
- Network Deployment: WEB, CLI, Telnet, FTP
Green Features:
- Scheduled Shutdown of AP RF Interface: Supported
- Scheduled Shutdown of Wireless Service: Supported
- Per-packet Power Adjustment (PPC): Supported
WLAN Application:
- RF Ping: Supported
- Remote Probe Analysis: Supported
- Packet Forwarding Fairness Adjustment: Supported
- 802.11n Packet Forwarding Suppression: Supported
- Access Based Traffic Shaping: Supported
- Co-AP Channel Sharing: Supported
- Co-AP Channel Reuse: Supported
- RF Interface Transmission Rate Adjustment Algorithm: Supported
- Drop Wireless Packet with Weak Signal: Supported
- Disable User Access with Weak Signal: Supported
- Disable Multicast Packet Caching: Supported
- Status Blink (Limited to Some APs): Supported
New Added Features:
- Policy Forwarding: Supported
- VLAN Pool: Supported
- Bonjour Gateway: Supported
- 802.11w: Supported
- 802.11k, v, r: Supported
- Hotspot2.0 (802.11u): Supported
- NAT: Supported
- VPN: Supported




