Cisco Business รุ่น CBW140AC-S

CBW140AC-S
Cisco Business 140AC Access Point

Specifications:

Authentication and Security:

• Wi-Fi Protected Access 2 (WPA2); WPA3 is coming in a post–Frame Check Sequence (FCS) release
• 802.1X, RADIUS Authentication, Authorization, and Accounting (AAA)
• Segmentation via VLANs (up to 16)
• 802.11r and 802.11i
• Guest network can also authenticate against: Google and Facebook

Maximum Clients:

• Maximum number of associated wireless clients: 200 per Wi-Fi radio, for a total of 400 clients per access point, or 1000 in a system

Maximum Number of Access Points:

• 50 (Recommended up to 25)

Maximum Number of Mesh Extenders:

• Maximum number of associated Cisco Business mesh extenders: 25 per Access Point, up to 8 hops

802.11ac:

• 2×2 single-user/multi-user MIMO with two spatial streams, up to 867 Mbps in 5GHz
• 20-, 40-, and 80-MHz channels
• Dynamic Frequency Selection (DFS)

Ethernet Ports:

• Authentication with 802.1X or MAC filtered
• Dynamic VLAN or per port
• Traffic locally switched or tunneled back to Master AP

Data Rates Supported:

• 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
• 802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)

Available Transmit Power Settings:

• 2.4 GHz: Up to 20 dBm
• 5 GHz: Up to 20 dBm

Integrated Antennas:

• 2.4 GHz, gain 2 dBi
• 5 GHz, gain 4 dBi

Interfaces:

• 1x Gigabit Ethernet (10/100/1000BASE-T autosensing), Power over Ethernet (PoE)
• RJ-45 console port (not functional)

Indicators:

• Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions (W x L x H):

• Access point (without mounting bracket): 6 x 6 x 1.3 in. (150.8 x 150.8 x 33 mm)

Weight:

• Access point without mounting bracket or any other accessories: 14 oz (400 g)

Environmental:

• Operating Temperature: 32° to 104°F (0° to 50°C)
• Humidity: 10% to 90% (noncondensing)
• Maximum Altitude: 9843 ft (3000 m) at 40°C
• Nonoperating (storage and transportation):
  • Temperature: –22° to 158°F (-30° to 70°C)
  • Humidity: 10% to 90% (noncondensing)
  • Maximum Altitude: 15,000 ft (4500 m) at 25°C

System:

• 1 GB DRAM, 256 MB flash
• 710-MHz quad core processor

Powering Options:

• 802.3af/at Ethernet switch; a Cisco Business switch with PoE is recommended
• Optional Cisco Business PoE injector

Power Draw:

• 8.3W (maximum, on PoE)

Mounting and Physical Security:

• Included with the access point:
  • Mounting bracket
  • Torx security screw
  • Ceiling rail mount clip

สอบถามค่าติดตั้ง Service Installation